About HD Video Recorder upgrade firmware


ezcap28X HD recording box series, such as ezap 280, 280HB, 284, 295, etc.

1. Download the firmware program, unzip and get the jedi.img file. Save it in a blank U disk.

2. Turn off the power supply of the device (the simple method is to unplug the power plug from the device), then insert the U disk into the device, and then start the power supply of the device (plug in the power plug again). Usually the LED of the device will start flashing and stop flashing after a few seconds. At this time, unplug the U disk and plug it into the computer for confirmation. If the jedi.img file disappears, the firmware program is upgraded successfully.

3, website download link We usually only provide standard firmware program, please confirm the specific model you purchased and find it. If you need other special requirements, please find the answer in the corresponding FAQ link, or write us an email directly.

4. ezcap295 and ezcap292 are more special. They have two firmware programs. The jedi.img file is for the recording part, and the MERGE. binfile is for the system part. The jedi.img file is upgraded as described above. The MERGE. binfile is upgraded as follows: copy the file to the U disk, plug it into the USB host interface of the device, select the menu-update program through the remote controller or key, and follow the prompts until the firmware program upgrade is completed.

 

ezcap27X HD game recording box series, such as ezcap 273, 274, 275, etc.

1. Download the firmware program, unzip and get two files: 273.BRN and FY_KEY. Save them in a blank TF card.

2. Before the official upgrade, please confirm the old firmware program version: Settings-System-System Information, and then write down the old firmware version information.

3. Turn off the power of the device, insert the TF card into the device, and then start the power of the device. The words "FW ISP" will appear on the display, indicating that the device is upgrading the firmware program. Wait until the display screen turns black to indicate that the upgrade is completed. At this time, turn off the power supply and restart the power supply. Then confirm the firmware version again. If it is changed from the previous one, the upgrade is successful.

4, website download link We usually only provide standard firmware program, please confirm the specific model you purchased and find it. If you need other special requirements, please find the answer in the corresponding FAQ link, or write us an email directly.

5. Different models of products may have different firmware file names, such as ezcap273 273.BRNand ezcap274 274.BRN. So no need to care, directly copy the decompressed file to the TF card.